Is it possible to disable antenna 2? The warning "Be sure you have an antenna or dummy load connected to the active antenna port before transmitting" is a bit animus for my occasional fumble fingers. I guess I could just remember to hook up a 100w dummy load to antenna 2 when I set up, but it would be nice to just remove the possibility via FW.
My KAT500 always remembers the last antenna used for the selected band. So I guess that would be true with the AT in the KXPA100 and I could make sure to set up each band I use with the correct antenna selection. The mistake I don't want to make is holding the AT Tune / ANT button instead of taping it and thereby selecting antenna 2. On the K3 they are two different buttons and I am really unlikely to make the mistake. I thought I read a post on this before, but could not find it in my searches. Tnx ..mike AI6II -- View this message in context: http://elecraft.365791.n2.nabble.com/QRO-KXPA100-AT-Can-antenna-2-be-disabled-tp7582858.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
