Jim, the key question is what version of firmware is in your KPA500. This is viewable in the menu, under the FIRMWARE selection.
Also, what is your RADIO selection in the KPA when using it with the KX3? If you do not have the latest firmware, I would advise you to upgrade. There was a bug fix that affected this some time back. Jack Brindle, W6FB Sent from my iPad > On Jan 18, 2014, at 9:25 AM, Jim Bennett <[email protected]> wrote: > > I recently got a KX3 and have set up my station such that the KX3 can share > the KPA500, KAT500, and several antennas by using a pretty beefy Daiwa > 2-position coax switch. The station is set up just like the diagram on page > 147 of KE7X's KX3 book. This configuration seems to work very well. However, > I've recently noticed a very occasional anomaly with the KPA500. Every once > in a while, I go to power it on and nothing happens. I have to reach around > to the back panel rocker switch, turn it "Off" and then back on. Then, the > front panel power on button brings the amp to life. So far I've not been able > to track it down to a particular sequence of operating events that precedes > it. In the past 3-4 days, this has happened maybe three times. > > Anyone else have this happen, and if so (1) what causes it, and (2) how to > resolve it? Not a big deal, but I'd like to know what's going on. > > Jim / W6JHB > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
