Byron,
Not possible.
The K1-4 has only 2 low pass filters, one has a cutoff frequency above
the 30 meter band and works well for both 40 and 30 meters. The other
has a cutoff above the 15 meter band and works well for 20, 17, and/or
15 meters.
You could use the lower band for 160 meters (with a lot of re-design),
but it would become a 3 band board - the LPF filter would have to have a
cutoff frequency below 80 meters to suppress the 2nd harmonic. so 2
bands on that LPF would not be possible.
A better choice to add 160 meters is to use a 2 band board. If you want
the details of the components to be added for 160 meters, ask and I can
send them to you - the component values have been posted before, and you
may be able to find them in the archives (3 or 4 years ago).
73,
Don W3FPR
On 1/19/2014 8:16 PM, Byron Allen wrote:
Anyone have a schematic to get a K1-4 on 160 meters ???
BYRON / N4AX
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html