Bob,
You should try installing the W2 utility (obviously you need to connect
your W2 to a computer via the USB/serial cable that came with the W2 in
order to do this). It shows the SWR and forward power with more
precision than you get with the led front panel display. It would be
interesting to see if you see a different reading when transmitting with
the XV50 vs. when you are not transmitting, even if the value is very
low (i.e. low enough not to light a single led).
Which range led is lit on the front panel?
John
AC0ZG
On 1/21/2014 9:39 PM, Bob KD7YZ wrote:
It's the correct sensor. The W2 reads the K3 output. But when it's
cabled to the Elecraft 6m Transverter, there is no power reading. I
sometimes see a few green LED's for 1.3 to 1.5 VSWR. Never a power reading.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
