The rear sockets are slightly weak in terms of mechanical strength and I need to replace them. As a result, using front port could be a good alternative in long term.
Just a personal preference. 73 Johnny VR2XMC ________________________________ 寄件人︰ barry whittemore <[email protected]> 收件人︰ "[email protected]" <[email protected]> 傳送日期︰ 2014年01月23日 (週四) 3:52 AM 主題︰ Re: [Elecraft] K3: Problem with CM-500 plugged into frontpanel through AD1K I do not understand the need or desire to use the front port. I use CM-500 but plug into the rear ports. One of the features of the really like about the K3 is the clean look with nothing plugged into the front. I converted an old hand mike into a K3 pinout so i could use it if i ever wanted to use a hand mike. so far other than when i tested it the connector has been vacant. GL Barry NF1O ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net/ Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
