Jean-Francios,
I believe that means you should email [email protected] for further
assistance.
Try doing the TX Gain calibration before attempting the TX Carrier
Balance. It seems you have a failure in the TX Gain calibration, or at
least the TX carrier balance procedure thinks there is a problem.
73,
Don W3FPR
On 1/26/2014 8:31 PM, JEAN-FRANCOIS MENARD wrote:
Hi Don,
I did the procedure on page 33.
On the 4W test, these bands failed with the error code ERR TXG D=0000
Bands that failed are 60m, 40m, 20m, 17m, 12m
On the 6W test, all bands passed the test.
Regards,
===
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
