You can find the K3Meter app here: http://w4smt.com/sight.net/K3Meter/
I'm not sure it will work with a K2. I don't recall testing it. This is circa 2008. David, W4SMT ________________________________ From: Matt Zilmer <[email protected]> To: [email protected] Cc: [email protected]; [email protected] Sent: Saturday, February 8, 2014 9:49 AM Subject: Re: [Elecraft] [ELECRAFT] K2 : Analog S-meter considerations. For the K2/K3 analog (computer) meter program, try a search for W4SMT. That's all that shows in the Help-About box. 73, matt W6NIA On Sat, 08 Feb 2014 09:41:37 -0500, you wrote: >Jean, > >The signal you want is available from Control Board U2 pin 1 - that is >an analog signal. >You should follow it with a unity Gain Op Amp stage to minimize any >loading effects of the analog meter, and you may even want to do some >scaling after the op amp to properly drive whatever meter you will be using. > >In other words, this meter should be in addition to the LED bargraph >rather than as a replacement. The LED Bargraph also shows relative >transmit power or ALC level in transmit mode. > >If you use a computer with the K2, there used to be an analog type >S-meter display application available, but I forget where it can be >found. Perhaps someone else will know where to find it. > >73, >Don W3FPR > >On 2/8/2014 9:23 AM, Behiels JeanPierre wrote: >> >> Hi K2-members; >> >> >> >> >> >> I do have successfully build a K2/100,but now I like to do some experiments >> with a analog S-meter device temporary in place of the standard K2 LED >> device. >> >> Could someone give me some suggestions where I best,could pickup this 2 wire >> S-meter signal for my analog indication device. >> >> Personally I really prefer a analog reading and indication in place of a LED >> device ! >> >> I like to do some comparing around the both devices . >> >> >> >> I look forward to your suggestions and maby some experiences around ? >> >> > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html Matt Zilmer, W6NIA www.elecraft.com 831-763-4211 x129 Skype: matt.zilmer ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
