Jean-Marc,
Yes, you will need to align those filters.
I normally set the FL1 position to OP1, FL2 to 1.00, FL3 to 0.70 and FL4
to 0.40 widths.
Then set the BFOs for FL1 to the same values as the SSB filters - RTTY
corresponds to LSB and RTTY REV corresponds to USB. That filter will be
used for transmit in all cases and works well with a waterfall display
for normal receive.
Set the other filters to center on 1000 Hz. Those can be used if a
strong interfering signal appears inside the passband of the OP1
filter. Observe the LSB/USB relationship - the DAC numbers (and also
frequency) will be higher for RTTY REV.
If you have the KDSP2 option, also set those filters 2, 3, and 4 to
center at 1000 Hz to agree with the IF filter centers.
The use of Spectrogram is recommended when aligning the IF filters. You
can download a copy from my website www.w3fpr.com - look near the bottom
of the home page. Instructions for the use of Spectrogram can be found
in the K2 Dial Calibration article.
73,
Don W3FPR
On 2/11/2014 3:07 AM, F5LCI wrote:
Hello,
After successful use of JT65 with my KX3 overseas, I am back to my K2.
According to the manual, the "r" mode is advised, because passband and ALC
are optimized.
(I never use RTTY)
On my rig, the "r" mode, as the reverted "r" mode, give the same reverted
tones on the wsjt window, and no decode, of course.
Is JT65 impossible on this mode, or do I have to reconsider the filters
alignment or anything else ?
Best 72 de Jean-Marc, F5LCI
"To nobody, except those who will take pleasure here" (Franz Schubert,
1797-1828)
--
View this message in context:
http://elecraft.365791.n2.nabble.com/JT-modes-alignment-tp7584041.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
