There is nothing "there" on the RX Out unless one select RX Ant. Look at the K3 schematics and read the Owners Manual. If you want to split the main receiver antenna feed, you will need to add a splitter to the RX Out, connect one output port to your "Fucbr" (whatever that is), the other output port back to the RX Ant jack and select RX Ant. The splitting loss will be a killer on 6, 12, 10 and possibly 15 meters so it will be necessary to use a preamp ahead of the splitter to maintain sensitivity on those bands.
73, ... Joe, W4TV On 2/11/2014 10:54 AM, Bob KD7YZ wrote:
I bought a Fucubr Donglr Pro+ AKA FCDP+ or FC+ . The USB device has a connector to which, via adapter(s), one can connect any antenna we all own. So I want whatever antenna the K3 is currently using to let signals from that antenna, in the Rx mode only, to be present on Rx-Out BNC, on the back of my K3. I thought I was perhaps "there" except that the signals appearing on a waterfall display, of SDR-Radio program, were all but reduced to 0 they were so very very weak. Is there another adjustment, in the CONFIG, I need to make?
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
