Change the first occurrance of "on" in the paragraph below to "off" and
it will make more sense.
73,
Don W3FPR
------------------------------------------
If you choose to calibrate with the preamp on, just add 2 S-units to the
reading, or if above S-9, add 10 dB when giving reports with the preamp
off. Conversely, subtract 2 S-units or 10 dB when operating with the
preamp on if you calibrated it with the preamp off.
Don W3FPR
On 2/14/2014 4:08 PM, Eddy wrote:
Hello K2 receiver wizards, what makes more sense when using the XG1 to set the
S-meter on a K2, pre-amp on or off? As you well know, pre-amp makes a big
difference on 40mtr......I suppose most K2 owners turn pre-amp on from 20mtrs
and up, while turning it off 160-40 for better selectivity.
Many thanks for your advice and opinions.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
