I know other experts will give you more advice. From my past experience, I would build the basic K2 first. Since you have KSB2, there are some components for KSB2 to be installed on the front panel, you can do that as well.
Once your basic K2 is ready and fine, you can start with the others. I am assuming a first builder. For me, built many K2 in the past, I will cut the corner and install all relevant parts of the options in RF / front panel board at first hand. This approach is not recommended if you don't familiar with K2 building because this will hinder the troubleshooting process in case of problems. I don't object the installation of junction connector but you have to make proper record yourself - see taking a photo with your smartphone. Hope this help. 73 Johnny VR2XMC ________________________________ 寄件人︰ Sean Michael Johnston <[email protected]> 收件人︰ [email protected] 傳送日期︰ 2014年02月15日 (週六) 9:27 AM 主題︰ [Elecraft] [K2] Build questions I am building the K2 along with options KDSP2, KSB2, K160RX, & K60XV, and I would like to avoid desoldering parts as much as possible. Does anyone have a suggestion as to which parts of the options it is OK to add as I am building the RF board? Is it safe to add any of the larger capacitors from the add-on kits without attaching the actual add-on boards for initial testing of the K2, or is that a bad idea? I am planning on installing all the Junction connectors and plugging in temporary jumpers instead of soldering the jumpers directly to board. Is this recommended/safe? Thanks - Sean ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net/ Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
