The P3 should work fine with 11V. When I tested mine it worked down to
about 6V or so, although that is not guaranteed.
It is normal for the K3 power connector to show a voltage drop compared
to the 12V input connector, although 1.5V drop seems kind of high.
Could some of that drop be in the power cable?
Alan N1AL
On 02/17/2014 08:20 AM, mike wrote:
Unable to run P3/VGA from K3 12v output for K3 serial number #5981. Only
seeing 11 volts when the K3 sees 12.5 volts.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-12v-outlet-only-puting-out-11-volts-tp7584345.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
