Loaded 1.38 and checked - no surprises in normal operation with K3 & KAT500 all appropriately cabled together. 73 es gud dxing -- Don N4HH
________________________________ From: Wayne Burdick <[email protected]> To: Elecraft Reflector <[email protected]> Cc: "[email protected]" <[email protected]> Sent: Tuesday, February 18, 2014 11:45 AM Subject: [Elecraft_K3] Please test KPA500 rev. 1.38 if you get a chance Hi all, We updated the KPA500 beta firmware to revision 1.38 yesterday (from 1.37). The change was minor, pertaining to initial conditions when the KPA500 is used at remote locations. If you get a chance, please load rev. 1.38 and verify that it is working well for all normal operation. Once we see a few more positive reports, we'll be going to production status on the K3, KPA500, and KAT500 beta firmware releases. If you haven't already loaded K3 rev 4.83 and KAT500 rev 1.58, I'd encourage you to do these updates as well. The difference between the new firmware and previous production releases is pretty dramatic, as reported by beta testers over the past several days. 73, Wayne N6KR __._,_.___ Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (1) Visit Your Group * New Members 6 • Privacy • Unsubscribe • Terms of Use . __,_._,___ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
