No,  I verified that in the utility and the KX3 that ATU.X shows MANual as 
expected.

On Feb 18, 2014, at 7:24 PM, Bill Blomgren (kk4qdz) <billblomg...@yahoo.com> 
wrote:

> Now THAT is strange - Did the setting for the PA change to not present 
> perhaps?
>  
> If you hit tune on 20 meters, does it drop almost instantly to 1:1?
>  
>  
>  
> KK4QDZ - Now with Extra Class Priv's, and a tiny KX3 to enjoy them!
> 
> From: Chris Johnson <elecr...@ozy.us>
> To: "elecraft@mailman.qth.net" <elecraft@mailman.qth.net> 
> Sent: Tuesday, February 18, 2014 9:17 PM
> Subject: [Elecraft] KXPA100 ATU Issue
> 
> My KX3 and KXPA100 has been off for about 1 month due to Life getting in the 
> way.  Today I turned it back on, checked available firmware and updated my 
> KX3 to the current FW and my KXPA100 to the 1.09 beta.  When trying to use 
> the amp ATU.X, nothing happens.  The SWR light flashes continuously after the 
> attempt and the unit makes no ATU sounds.  If I turn off the amp via PA-OFF, 
> and try the internal KX3 tuner, it is working fine.  I then reverted the 
> KXPA100 back to non-beta 1.04 with the same results.  The utility connects 
> and can see status.
> 
> If I tune to a band that does not need a tuner, such as 20M on my windom, and 
> hold XMIT to send a carrier, as long as I am under 10W using the KX3, power 
> is being output.    When I go above 10W, the output is as shown:
> 
> https://www.flickr.com/photos/ozy311/12624894153/
> 
> My fault table also looks very odd.  No way my power was that high, but that 
> may be from v1.0 firmware.  And my SWR and voltage never dropped that low, 
> unless it faults that when power is removed and the supply drains.
> 
> https://www.flickr.com/photos/ozy311/12625150863/in/photostream/
> 
> I really hope nothing is wrong.  I need to use it Thurs-Sunday at our camping 
> event.  :(
> 
> Please help!
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net/
> Please help support this email list: http://www.qsl.net/donate.html
> 
> 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to