If you used s stereo plug, how is it wired? Should be tip and shield for ONE speaker.
Also is SPKR + PH set to YES? If this is NO then you won't have any speaker output. If the internal spkr works this isn't a problem. ...bill nr4c Sent from my Verizon Wireless 4G LTE DROID a...@sbcglobal.net wrote: >I recently purchased 2 replacement K3 speakers to make tuned port enclosures >for CW audio. >Plugging one of the speakers to the rear panel jack (via 3.5mm stereo plug) to >test resulted in no output. >Had the config SPKRS = 1 Rear jack worked fine last time I tried an external >speaker. Full audio >output is fine on the internal speaker. Anyone reading had this issue? Any >ideas? > >73, >Mike AC5P >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
