John:
The external speaker jack is mono. When you plug a stereo plug into a
mono jack, you only get sound on the speaker connected to the tip of the
plug. I guess you could either replace the mono jack with a stereo one
or replace the stereo plug with a mono one. Either way, you'd have an
impedance mismatch. If you are using amplified speakers, maybe it would
work if you plugged them into the headphone jack, which is a stereo
jack. Some think the K2 audio output is marginal. I can't imagine it
getting better if you try to drive 2 non-amplified speakers instead of 1.
Good luck,
John AA0VE
n3drk wrote:
I connected an external speaker to the ext speaker jack on the back of the k2.
However only one speaker
has audio coming from it. I plugged the same ext speaker into the mark v and
the two speakers
have audio. These are stereo speakers. Should not the k2 have audio coming from
both speakers?
john
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
