You might set up a command memory or two and use a PF button or two to adjust the power level between 25 and 100 watts.
73 de Dick, K6KR -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Richard Thorpe Sent: Monday, March 10, 2014 9:41 AM To: Elecraft List Subject: [Elecraft] Setup Help I have my K3 driving an Expert Amp. I set the K3 (with the ATU out) at 25W on each band to drive the Expert to full output. A lot of times I don't want to turn on the amp and use the K3 "barefoot" at 100W with the ATU switched in. What is the simplest way to do this? I need to change the K3 power out for each band, switch the antenna, switch in the ATU. Is there some simple way to do this? Any suggestions would be appreciated. K6CG ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
