Command macros are intended for situations just like this. See K3 Utility Help, Command Tester/K3 Macros.
Some clever owners have found ways to use two or more command macros and need only one button to toggle between them. There's a link to a couple of these articles in K3 Utility Help. 73 de Dick, K6KR -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of PA2V Sent: Tuesday, March 11, 2014 10:12 AM To: [email protected] Subject: [Elecraft] Microphone settings K3 Hello group. I am using a headset microphone during contests connected to the rear connector. During "normal" operations I like my hand microphone most that is connected to the front panel. Both microphones have different elements and settings. As far I could discover it is not possible to store different settings in the K3 for the rear or front connector. My only option so far would be to store the setup in the PC and upload the one I need. (not very handy) But wouldn't it be handy to store it in the K3? Any ideas? 73, Peter PA2V ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
