Gary,
Try to put a 4-40 screw into the holes. If it goes through, it is a 1/8
inch hole (clearance for 4-40 screws), but if it must be threaded in,
all is well. A threaded hole for 4-40 will look almost like a 1/8 inch
hole.
Yes, the holes should be threaded for 4-40.
73,
Don W3FPR
On 3/14/2014 9:44 PM, Gary Mohrlant wrote:
I'm assembling a KPA-500 that I received today and I'm at the step
where I mount the Rectifier bd to the Z-bracket. It looks like the 4
holes for mounting the rectifiers should be threaded for 4-40 screws
but mine has about 1/8" holes. There is no mention of using a screw
and nut to mount them and there is none provided. I wonder if anyone
else has run into this problem
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
