Ken,
Sorry, I do not have an older K1 manual. If anyone has a pdf copy, I
would like to have it too.
I can tell you how I set the TS offset on these older K1s, but it does
take a few extra pieces of gear.
I use a signal generator (another transmitter working into a dummy load
will do) to produce a signal and receive it (zero beat) at the K1
sidetone pitch on both the K1 and a monitor receiver.
Then without touching the K1 VFO or the monitor receiver, I transmit
(into a dummy load) and set the TX offset so the pitch is the same on
the monitor receiver.
I do play the monitor receiver into the soundcard and view the audio
pitch using Spectrogram to make certain the pitch is the same, but you
can do the same by just zero-beating the signal in the monitor receiver
- tune the TX offset capacitor until it is zero best.
73,
Don W3FPR
On 3/18/2014 1:53 PM, ke...@arrl.net wrote:
Does anyone have a PDF of this older manual, in particular the section on
setting the transmitter offset? TNX!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com