Roger,
That sounds like you might have a bad KXUSB cable.
You may have 2 of them, one which came with the KX3 and another that
came with the KXPA100.
Try both of them on the KX3 alone. If it works there, then introduce
the KXPA100 to the same cable.
Do not change USB jacks - often the operating system will change the
assigned COM port if you change the USB port that the cable is plugged into.
73,
Don W3FPR
On 3/18/2014 3:23 PM, Roger Brisson wrote:
I received my KXPA100 with tuner and hooked it all up. I use macloggerDX for
logging and connection to my kx3. I plug the computer into the kxpa100 where
it shows but the computer does not find the kx3. I check the serial port and
it is the same I was using before. I downloaded the driver again and still not
making a connection. I then tried connecting directly to the kx3 but still not
finding it?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
