Others have answered the power-per-band issue. If you are seeing power overshoot from the K3 then you should do a recalibration of the K3 power.
JackB, W6FB Sent from my iPad > On Mar 23, 2014, at 9:31 AM, Dick Frey <[email protected]> wrote: > > I am bringing up a new (to me) K3. > > What makes the drive level track between bands without the nasty ALC > overshoots? The drive from the K3 sometimes also takes a while to settle > down when coming up on a new band. This drives me crazy in changing bands > and modes while chasing W1AW/# stations. > > What to invoke to make the output of the K3 go back to 100W when the KPA is > off or stby? It presently stays at the ~30W needed for 500W out. Is this a > KPA or K3 issue? > > -- > Dick - K4XU > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
