Tap of the TUNE button should start tuning, and the 25 watt LED should blink during tune.
Another tap while tuning should cancel tuning, and the 25 watt LED should stop blinking. ANT change is a Hold of the same button. Antenna change requests (button hold or KXPA Utility) should be ignored while tuning or transmitting. 73 de Dick, K6KR > On Mar 24, 2014, at 9:40, Chad Wasinger <[email protected]> wrote: > > Hi Group, > > Quick question on the KXPA100. I have a brand new factory built unit with > antenna tuner that seems to have a possible antenna switching problem. When I > press and hold the Tune (ANT) button, the amp typically sounds as if a relay > is chattering and the LED under 25 flashes. Almost like it doesn't recognize > the switch command and attempts to go into the tune mode. Regardless of what > it is doing, the antenna switching does not take place. I've also tried to > switch using the KXPA utility and it will not make the switch either when the > amp is acting like this. Now sometimes the switching will all function > correctly from the button or utility. > > Anyone else experience similar issues when attempting to switch between > antenna 1 and 2? > > Thanks! > Chad > N0YK > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
