Tom, Try the following: 1) download new firmware files from Elecraft 2) Load only the DSP firmware to the K3 3) once the DSP firmware has been loaded, then load the MCU and FP firmware.
I suggest this order because there may have been some changes in the MCU code that depend on a response from the DSP code, but the updated DSP code has not yet been loaded.
No guarantees, but it is worth a try. If that does not cure it, contact support. 73, Don W3FPR On 3/25/2014 8:07 AM, Tom Morehouse wrote:
Well, still stumped --- and error messages I get are E 0000202, then E000A0A, with the text ERR DSE. I'm using the latest utility for the mac, and the elecraft serial to usb cable....this is the first time i've had an issue with downloading software in over 3 years. . . .
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
