I've used a kx3 as the third radio in a so3r configuration. I was low power but did not see any additional issues with using a kx3 rather than a k3. You may find it necessary to use the 8 kHz offset to reduce the zero if bleed through if you don't have enough inter band isolation.
Mark. N2QT > Message: 10 > Date: Tue, 25 Mar 2014 07:53:26 -0700 > From: Jeff Kinzli N6GQ <j...@n6gq.com> > To: Elecraft Reflector <elecraft@mailman.qth.net> > Subject: [Elecraft] KX3+K3 in SO2R > Message-ID: > <CALfN8=bfg9g9pqauybbympv7ricej7qbu7vxljv+zfohmgp...@mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > Hello friends, > > I'm curious who has tried an SO2R setup of K3 as primary, and KX3 as > secondary radios in a SO2R set up. If you did, did you find anything > out of the ordinary with respect to the KX3 being the secondary radio? > More prone to interference from the primary radio (or vise-versa)? > > My guess is that it should be just fine, but if someone's already > walked in those shoes and worked through things I'd love to hear them. > > My plan is to use the K3+Acom amp as primary, KX3+100w amp as > secondary, using the YCCC SO2R box as the controller. This will be for > a DXpedition for CQWW SSB in October. > > Thanks ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
