If I wanted to be prepared for whatever comes along, I'd get a large and
small chisel, plus small conical for SMD. For example:
5.2mm chisel T15-D52
1.2mm chisel T15-D12
0.2mm conical T15-BLL
The long slender snoot on that conical makes it easier to see an SMD
part underneath. The D24/2.4mm chisel is also nice if you want something
big enough to hit a larger through hole tab, but you don't want to swap
tips to get into a tight space.
The colored sleeves are also nice. You can hot swap tips and the bright
colors (orange, green, blue, etc) mean you can quickly grab the size you
want without close inspection. Those are part# B321x, where x specifies
the color.
73,
Josh W6XU
On 3/25/2014 6:14 PM, Phil & Debbie Salas wrote:
What tip or tips do you recommend? They have a 4mm chisel, a 5.2mm chisel, and
a conical.
Thanks,
Phil – AD5X
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
