Thanks everyone! Don, will this setup liven up the mic? Or is there a way to just switch to front panel mic input only when using SL USB? I mean I know I can set the menu option to fp mic. But if I didn't and SL USB keyed up the rig - my actual mic would be live, right?
Slava Baytalskiy sla...@nullserv.com W2RMS On Mar 26, 2014, at 12:56 PM, Don Wilhelm <w3...@embarqmail.com> wrote: > Slava, > > Yes, you should be able to use the front mic jack. Set the SignaLink for mic > level output rather than line level (see the SignaLink documentation). Turn > bias off for the front mic. > > It is feasible that you could feed the SignaLink into your audio rack, but it > should not run through any of the conditioning mechanisms. If you do that, > you would want to kill all other inputs to your audio rack and just run the > SignaLink 'straight through' to the Line In on the K3. Whether that is > possible or not depends on the capabilities of your mixer. > > 73, > Don W3FPR > > On 3/26/2014 12:36 PM, Slava Baytalskiy wrote: >> Hello everyone! >> I have a Signalink USB box that I'd like to interface with my new K3. From >> what I understand the preferred connection method is via the rear >> Line-In/Out jacks, right? I am using those with my rack audio gear, though >> (xlr mic/EQ/mixer/etc). What would you guys suggest that I do? >> Can/should I use the front mic connector (it is the standard Kenwood 8-pin >> pinout, right?). Or is it possible to connect the Signalink inline with the >> audio stuff, between the rack and the K3? >> Also, I have a new LP-PAN with an E-mu 0404 sound card that I haven't >> connected yet. So I wonder if that can somehow be used for the Signalink. >> >> I also have an iPlus box (FYI). >> Thanks in advance for your suggestions and ideas! >> >> Slava Baytalskiy >> sla...@nullserv.com >> W2RMS >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to w3...@embarqmail.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com