Jack,
Go into the main menu and turn off MIC+LINE and both mic inputs will be
muted.
I assume you have MIC SEL set to LINE, but check that too or your data
mode transmission will not work.
73,
Don W3FPR
On 3/27/2014 2:25 PM, Jack Berry wrote:
Is there a way for FLDIGI to mute the front panel mic input with transmitting
digital modes?
I use FLDIGI 3.21.77 with SignaLink USB, mostly for MT63 MARS work.
The SLUSB is connected to the Line In on the back panel. It all works well
except.....
While transmitting MT63 the mic remains open, normally no problem. However if a
dog barks or a phone rings then all bets are off on the quality of the
transmission. This is especially true if conditions are marginal.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
