Bill,
Try this - first download the latest K3 Utility and get the new firmware
files as usual (Check for New Firmware).
Then using the Advanced tab of K3 Utility, Check the DSP1 box and
click "Load checked firmware".
When that completes, do the same for the FPF loading only that firmware.
After you do that, you can exit from the Advanced screen and the Send
all Firmware to the K3.
Let us know if that works.
73,
Don W3FPR
On 3/31/2014 5:31 PM, Bill Coleman wrote:
PS - the specific error I get is:
“FPF Programming Failed.
“Verify file source and revision. Turn the K3 off and back on, then re-try the
firmware load.”
I’ve re-downloaded the files from Elecraft a couple of times using the K3
Utility. I’ve powered off and on many times.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
