The latest KXPA100 beta firmware, rev. 1.25, significant improves the amplifier's behavior when used with external antenna tuners. Many high-power tuners, including the KAT500, work best with 10-20 W of RF. You can now use the KXPA100 in this range, since it is more tolerant of the forward- and reflected-power overshoots that often occur during antenna tuning.
There's another notable improvement: When the attenuator is inserted because of SWR or high reflected power, it will be released immediately on the next key up if SWR has been reduced to 3:1 or better. Please refer to our KXPA100 firmware page for further details: http://www.elecraft.com/KXPA100/KXPA100_software.htm 73, Wayne N6KR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
