Steve,
If you do not have the special cable to connect the KPA100 AUX IO
connector to the computer, you will have to make one. The diagram is in
the KPA100 manual. Do not connect a full serial cable or USB serial
adapter directly to the KPA100 AUX IO - it is NOT a serial port, it
contains internal K2 signals for operation of external Elecraft devices
such as the KAT100, XV transverters, and KRC2.
If you have the KAT100, you will also need to make the end that connects
to the KAT100 - see the KAT100 manual for a full diagram of both cables.
73,
Don W3FPR
On 3/31/2014 7:22 PM, Steve Banks wrote:
Hi
It's been a long time since I last had my K2 connected under PC control.
But could someone there tell me which rear-panel connectors to use and give
me an education about how to connect to what? I'm more than willing to
rummage through a K2 manual if you prefer.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
