The transverter IF out from the K3 is a transmit signal. If you connected KX3 to the K3 transverter output then the K3 would be transmitting into the KX3. I wouldn't do that.
If you connected the KX3 to the K3 IF output the KX3 would be transmitting into the K3 IF output. I wouldn't do that. You would probably need an attenuator to reduce the strength of the K3 IF output so that the KX3's front end didn't overload. Enough attenuation might prevent the K3 IF output from being damaged. I still wouldn't do this. -- View this message in context: http://elecraft.365791.n2.nabble.com/IF-out-to-kx3-as-panadapter-for-K3-tp7582627p7586832.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
