I have exactly the same setup except that I use an SGC237. Set tune power to 5W and use the tune button on the radio. Works a treat for me.
Cheers, Mark F... VK3ZMF / VK3KW > -----Original Message----- > From: [email protected] [mailto:elecraft- > [email protected]] On Behalf Of Luc Favre > Sent: Wednesday, April 09, 2014 6:51 PM > To: Liste Elecraft > Subject: [Elecraft] KXPA100 et Smarttuner SG230 > > Hello, > > My configuration : KX3, KXPA100 (with KXAT100, not used in normal > operation), coax line, SG230 (Smartuner), doublet. > > My question : > In way to tune the Smarttuner, I must send some RF into the Smartuner via > the coax line. Before the tuning process begins, the SWR in the coax line to > the Smartuner may be very high. In this case, the KXPA100 goes into Fault > Condition ("Err Ant") ; no RF more, the tuning process stops. > > Roundabouts : > 1. PA off (via menu), tuning with KX3 barefoot. > 2. KXAT100 on, KXAT100 tuning, Smartuner tuning, KXAT100 off. > > Doing so (1. or 2 above), I can get the Smartuner tuned, but it's a bit > cumbersome. > > Any idea ? > > 73 > Luc/F6HJO/HB9ABB > __________________________________________________________ > ____ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Message > delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
