The utility disables the dialog pages when it cannot communicate with the K3. Try the port tab, test communications.
Also the milliwatt calibration dialog items are disabled if your KXV3 has not been enabled in the K3 CONFIG:KXV3 menu. 73 de Dick, K6KR -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jim Rogers Sent: Wednesday, April 09, 2014 15:50 PM To: [email protected] Subject: [Elecraft] K3 Utility and 1mW Calibration K3 says I got the 2M module installed etc., status LED flashes normal, but when I try to run the K3 Utility 1mW calibration it is all greyed out. I have missed something somewhere.... Jim, W4ATK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
