I have noticed the same thing on my KX3 as well. Can you redo the 1-2-1-2 test with FM?
You did the SSB test only with 1-2-1-2 but the FM test with XMIT full power and no variation in power with speech. -- VaibhaV On Thu, Apr 10, 2014 at 11:06 AM, Gary Hawkins <[email protected]> wrote: > Firstly thanks to everyone for your input on potential causes of SWR > reading instability with my KX3. Since there were so many possibilities > (antenna, heating, radio, etc.) I knew I needed to go back to basics and > initially test the radio with a dummy load on the bench. Well, I managed > to recreate the issue and have documented my findings in a short 4 min > video, http://youtu.be/cwxk4E01IfM > > In short the problem appears to be associated with the KX3 reporting of > SWR in SSB mode. My radio is configured as follows: uC 01.79, dSP 01.27. > As this issue has only recently developed (last month or so), and while I > can't be 100% sure, I think it may have occurred after I upgraded to this > firmware version. > > I'll be contacting the folks at Elecraft to get their opinion on this. > > 73's Gary K6YOA > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
