If I use CW then I get whatever the rig will put out, on 10m. The VSWR shows about 1.3:1
When I switch to Digital then I get about 6w out from 0 to 11w, as indicated when I turn the "PWR" knob. When I turn the PWR knob higher then though it indicates from 11 to 100, the output, as seen on the Elecraft W2, is circa 0 to 1 watt. Until I go to CW, as I said, then the output is correct, the K3 dial shows the correct number of bars and so forth. All other bands work fine on Tx-Data mode. The antenna is not the problem. I figure there is a setting somewhere I have messed up. However, this must be an elusive setting. -- Bob KD7YZ AMSAT LM 0901 http://www.qrz.com/db/KD7YZ www.denstarfarm.us/LGD ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
