The peak is about 2khz away.
Mike W0MU
On 4/18/2014 5:15 PM, Jim Brown wrote:
Mike and Johnny,
In CW mode, set the P3 for the narrowest Span (2 kHz), then use the
cursor to find the difference in frequency between the VFO and the
spurious signal. That will be the clue as to its source.
73, Jim K9YC
On 6m I notice a noise source just above or to the right of my vfo
frequency.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w...@w0mu.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com