I use a macro based on ZL2IFB's suggestions:

RT0;XT0;FR0;DV0;BW0040;SWT13;SWT13;UP4;SB1;BW0100;MN111;MP002;MN255;

It is assigned to PF1 (RIT button), you can do the job with K3 utils.

It copies the actual frequency to VFO B, moves the VFO 1 UP, sets on the corresponding filters. Now you listen the DX on your KRX3 while the main RX/TX is on the calling frequency. You can use QSK/QRQ while operating split.

I operate almost exclusively CW. For SSB you should modify the filter bandwidth and the UP shift (up 5 probably...).

73,
Martin, OK1RR

Dne 18.4.2014 16:46, Jim Miller napsal(a):
I had just noticed those lines but didn't think they were necessarily the
transmit freq as I was in CW and the line wasn't at 600 as I would have
expected.  Figured it was new for something but did not further research
them at the time.  I had my width wide to see the pileup and with it in the
middle, no help.

I am new at split.  Can I run split using my second receiver for the
transmit freq??  Then narrow the receive width on the transmit frequency vfo
so the line would be where it belongs???

Thanks, 73, Jim KG0KP

-----Original Message-----
From: Jim Rogers [mailto:jim.w4...@gmail.com]
Sent: Friday, April 18, 2014 6:33 AM
To: Jim Miller
Subject: Re: [Elecraft] K3 - Transmit signal monitor display on my P3 - show
location when split

It does.  VFO A is the green line and VFO B is the cyan line, If you are on
SSB it also shows the pass band  as either upper or lower sideband by which
side of the marker it is on. CW will be centered in the pass band.

73s JIm, W4ATK
On 4/18/2014 6:15 AM, Jim Miller wrote:
I want my signal to show me on my P3 where I am transmitting  split.
73, Jim KG0KP


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net Please help support this email
list: http://www.qsl.net/donate.html Message delivered to
jim.w4...@gmail.com




______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to mar...@ok1rr.com


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to