Phil,
While in the menu, the LED BRT selections show the LED Brightness when
(and if) the LEDs are turned on in normal operation. So yes, that is
normal behavior while in the menu. It changes only the LED brightness
and has nothing to do with the backlight.
73,
Don W3FPR
On 4/19/2014 6:08 PM, Phil Wheeler wrote:
This may be new or may have been there all along, because while I do
Backlight Off when operating outdoors, I don't think I've changed the
brightness until today.
So I'm running though the menu looking for something else and come to
the LED BRT item and wonder what the different brightnesses look like.
But I found that turning the main dial has the following effect:
* LED backlight goes off
* TX light goes on (but KX3 does not appear to
be in TX mode); the other three LEDs come on, too.
* This is the same light combo I see transiently
at KX3 power on.
* The LED BRT does respond to moving the main
dial to set it.
* Leaving menu turns off the LEDs and turns the
backlight back on.
Is this normal behavior? If not, what should I do next?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
