Thanks, David - As I said, I had downloaded the latest & greatest. Even sending the update file by file failed. K6KR suggested it may be a memory problem, and to contact Elecraft support.
73, Mike NF4L On Apr 19, 2014, at 5:04 PM, David Sanders W4DES <[email protected]> wrote: > Previously seen on the reflector from Don: > Try this - first download the latest K3 Utility and get the new firmware > files as usual (Check for New Firmware). Then using the Advanced tab of K3 > Utility, Check the DSP1 box and click "Load checked firmware”. When that > completes, do the same for the FPF loading only that firmware. After you do > that, you can exit from the Advanced screen and the Send all Firmware to the > K3. > > Let us know if that works. > > > 73, David W4DES > > > On Apr 19, 2014, at 3:13 PM, Mike Reublin <[email protected]> wrote: > >> Trying to help a friend with loading the latest firmware. I have the latest >> (Mac) utility and the latest firmware. The load fails at the FPF step. I've >> done the force procedure, no joy. >> >> Suggestions? >> >> 73, Mike NF4L >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
