Hi all, The bands were dead here today so I started working on getting the new signalink working. I usually run flrig with fldigi on my macbook pro hooked directly to the K3. I got the signalink for a new laptop. I start flrig and let it stay in the background while I work with fldigi. Everything works fine this way.
Here's what's happening: the signalink will key and un-key the K3 just fine. Fldigi will key the K3, transmit and receive normally, but the signalink un-key fine, but the K3 does not un-key unless I push the xmit button, and then it will change to receive. Flrig keys and un-keys the K3 just fine. I haven't tried using the signalink without frig. As well, the waterfall is very light. I turned up the line output to 20, with receeive knob at middle turn, but it is still light. Lots of signals are decoded but there are few traces. Any help out there? Thanks, Scott. AA0AA Sent from Scott's iPad ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
