I agree here ... FSK D, AFSK A, and PSK D should show 400, 400 and 100
Hz, while only DATA A should show the full 2.7 or 2.8 KHz.
It would also be very nice if *NORM* would default to 2.8 KHz in DATA A
on the K3 rather than 400 Hz (which is only appropriate for FSK D and
AFSK A).
73,
... Joe, W4TV
On 4/26/2014 9:02 AM, Mike K2MK wrote:
Hi Alan,
I think you should go a bit deeper and read the data sub mode and the DSP
bandwidth and have the transmit cursor agree more closely to how the
operator is listening to signals. When I'm operating split in RTTY the last
thing I want to see is a 2.7KHz wide red cursor cluttering up the screen. If
you can't do this then there could be a menu option to adjust the red cursor
width.
73,
Mike K2MK
Alan Bloom wrote
One change in the beta firmware is to make the width of the transmit
cursor in "Data A" mode equal to 2.7 kHz. The reason is that in Data A
mode there is no way for the firmware to know what the actual bandwidth
is - it can be whatever is coming out the PC's sound card. So rather
than assume narrow-FSK as in the old firmware, the new firmware makes
the cursor width equal to the SSB bandwidth.
Alan N1AL
On 04/25/2014 05:37 PM, Harry_Yingst via Elecraft wrote:
I am new to having a P3 (with SVGA).
I loaded the new beta and now there is a red background while in data
mode
Is that the Transmit cursor (I do not recall seeing it before)?
I noticed on the VGA monitor the Red will go from Low intensity Red to
High
intensity Red when you change the Waterfall Colors form Default to Grey
scale.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-Beta-software-Bug-tp7587926p7587946.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
