Hi, Sorry to jump in on the thread, without an answer, but a question-- why the need for a low end below 200 HZ? We are not broadcast stations after all... Maybe I am missing something but I see zero reason for all of this Extended SSB, all it seems to do is cause splatter...
-- Thanks and 73's, For equipment, and software setups and reviews see: www.nk7z.net for MixW support see; http://groups.yahoo.com/neo/groups/mixw/info for Dopplergram information see: http://groups.yahoo.com/neo/groups/dopplergram/info for MM-SSTV see: http://groups.yahoo.com/neo/groups/MM-SSTV/info On Sun, 2014-04-27 at 11:48 +0000, Larry Wassmann wrote: > Joe W4TV > > > Joe maybe you can tell me where I am going wrong then. I use the 6K ESSB > filter and have the K3 set up for 4K transmission. When I, and other look at > my signal I am in fact transmitting out to 4K when measured on a spectrum > analyzers. But when I look at signals myself on my receiver band pass display > on the SA, all I can see is signals out to about 3.5 or a little better. I > have the center frequency set at *155. I was told that is what it is supposed > to be set at. If I move the center frequency up to 200Hz yes I can receive up > to 4K but the bottom end amplitude is way down and when I try to play that > audio back via the DVR everyone says they have lost their bottom end. What am > I doing wrong? Are there other filters I should be using. I or none of the > other guys I know how to set up the K3 to faithfully capture receive audio > and play it back with frequencies below 200Hz, so if you know how to maintain > the same amplitude of signal on the receive low end that matches the trans mi > tted low end, we would really appreciate it. Thanks. > > > > > > > From: > Larry Martus Wassmann > Non omnis moriar > (Not all of me will die) - - - The good I do will live forever. > > www.w3oz.com > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
