Not currently, that requires a Band Change on the K3. The same as going
from "say" 40 meters to 10 meters.
You could ask Elecraft for automatic band changes based on tuning from
one band to another, but that function is not currently available.
I might suggest that you set up the K3 "Quick Memories" to accomplish
easy and quick band changes. That is much better IMHO than using the
Band+ and Band- buttons.
73,
Don W3FPR
On 4/29/2014 5:59 PM, Harry_Yingst via Elecraft wrote:
I use a converter to listen to below 500 kHz that I have setup on a
transverter band.
Is there a way to have it switch automatically as I dial up past 500kHz from
the
Transverter to the regular input? (basically a upper limit for the
transverter band)?
Thank you
--
View this message in context:
http://elecraft.365791.n2.nabble.com/How-can-I-set-the-top-edge-of-a-transverter-band-tp7588146.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
