My KX3 is about 2 months old and no such issues;
no scraping, filing nor dremeling required.
Probably a one-off issue, or a single batch.
Phil w7ox
On 4/30/14, 3:09 PM, Jim Lowman wrote:
Well, since a painted surface doesn't make a
good electrical connection, I would assume that
the removal is done for this reason.
The same is true of the W2 wattmeter kit.
Nor sure why Elecraft didn't specify to the
fabricator that this area on both kits should
not be painted.
I bought a Dremel tool kit, only to discover
that we had one already. :-)
73 de Jim - AD6CW
On 4/30/2014 2:26 PM, Vic Rosenthal K2VCO wrote:
I've found that the neatest way to do this is
to use a motor tool (in the US it's a 'Dremel
tool') with a conical grinding cylinder.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
