Thank you
I was thinking that may be the answer, at least until I start doing more JT9 & JT65 combined ________________________________ From: Lyle Johnson <[email protected]> To: Harry_Yingst <[email protected]>; [email protected] Sent: Wednesday, April 30, 2014 10:01 PM Subject: Re: [Elecraft] Anyway to get better Low Frequency Audio response out of the K3? Not at present. You might try tuning a little lower in dial frequency, say 100 or 200 Hz, to shift the signals in the waterfall to correspondingly higher pitches. Of course, if the waterfall is full end-to-end, then you'll experience some roll-off at the high end. 73, Lyle KK7P > When running JT65 the K3 rolls off on the low end of the audio. > > This tends to reduce the output power when trying to work a station on the > low end of the waterfall. > > Is there a way to open up the low end to get a little better Response on the > low end? ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
