I went back through the entire chapter and re-read it (as opposed to mis-reading it). Now I get it. Thanks for clearing me up Don.
73, Jeff - KG7HDZ > On May 2, 2014, at 5:53 PM, "Don Wilhelm" <[email protected]> wrote: > > Jeff, > > The KX3 Utility program is not intended to put out any sound (on any OS > platform). I am not certain where you found information that is does. > > The path for sound from Fldigi is quite different. Fldigi is "sort of" an > SDR application in that it takes the bandpass of the input audio and can pass > that audio along to the computer soundcard if that is enabled. > > 73, > Don W3FPR > >> On 5/2/2014 8:35 PM, Thorpe, Jeffrey wrote: >> I tried following the directions in KE7X’s book (7.5.2) to try and get a >> handle on how all this works, but ran into an odd problem - the KX3 utility >> program doesn’t seem to put out any sound. I unplugged the cable from the >> headphone/line out jack on my Macbook Pro and it was completely silent. >> Didn’t matter if it was CW, RTTY or PSK31. I then tried it on Fldigi and >> that program would output sound just fine. If I disconnect the USB/RS232 >> cable, then the Utility program does nothing. >> >> So, is there a known problem with the Utility on Mac, or am I likely doing >> something wrong? > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
