John,
Yes, that is easy. Follow the instructions in the manual in the order
written.
If you are not adept at determining screw sizes and lengths "by eye",
measure them.
That is all there is to it.
Build the base K3 first, then the KAT3, then the KPA3, followed by the
KRX3 and the KXV144 if you have those options.
73,
Don W3FPR
On 5/3/2014 6:07 AM, John, 9H5G wrote:
The kit is "in the mail" so I thought it would be a good time to fire off my first email
to the group and exit from "lurk" mode with a question.
I've read the K3 kit manual a few times now but I'm certain that there is a lot
of wisdom out there to be garnered from the collective experience of the group
so I'm asking if you would take the time to share please?
73 de John, KK4OYJ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
