Thank you Jim! Are you saying to use AFSK A for all sound card modes? -- Thanks and 73's, For equipment, and software setups and reviews see: www.nk7z.net for MixW support see; http://groups.yahoo.com/neo/groups/mixw/info for Dopplergram information see: http://groups.yahoo.com/neo/groups/dopplergram/info for MM-SSTV see: http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Tue, 2014-05-06 at 07:31 -0700, Jim Brown wrote: > On 5/6/2014 7:19 AM, David Cole wrote: > > However when I go to RTTY using MixW software on the same computer, > > leaving the K3 in DATA MODE A, I get the oddest behavior.. > > Hi Dave, > > Use AFSK and the Line Input for your setup. DATA A is USB, RTTY is LSB. > Don't ask me why. :) Also, check that RTTY Baud rate is 45, and tone > frequency matches what you're doing with your RTTY software (most of us > use MMTTY) > > 73, Jim K9YC > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
