WA7SPY wrote
> MN,120; MP128; (KX3 goes to CW Key 1 tip dot)
>
> MN120; MP127; (KX3 goes to CW Key 1 HAND
The macros should be:
MN120;MP000; (CW Key 1 tip=dot) bit 1 is CLEARED
and
MN120;MP002; (CW Key 1 HAND) bit 1 is SET
You should only provide the bit value for the parameter selected by the MN;
command.
The best way to see the correct command is to use the utility to read the
value for whatever parameter you are interested in (in this case MN120)
after you set it to the value you want manually on the KX3.
-----
73, Stan - KR7C
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-Macro-programming-question-tp7588615p7588685.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
